Last Updated on November 4, 2021 by Jeff
Treadmills are enormous devices. They take up so much space, and they cost a lot of money. Subsequently, you’d want to take great care of them, that’s why cleaning them is essential.
Today, we’ll talk about the process of cleaning the treadmill belt and how we can do that efficiently and safely so that your device is sparkling at all times.
Steps to Clean the Treadmill Belt
There are two main ways to clean the treadmill’s belt, and whichever way you decide to go, the most important thing is to be safe and careful.
Don’t use any cleaning products on the belt of your device under any circumstances, as that can lead to an electrical hazard and damage your treadmill infinitely. Now, we’ll discuss these two methods in detail so that you can choose the one that will suit you better.
First Method 
The first method is more of a manual way to clean your treadmill, as it involves a little bit more effort. Nevertheless, it’s safer since the device will be shut down and unplugged at all times. What you’re going to do is turn off the treadmill and unplug it completely.
Then, get a long towel, one that’s generously longer than the width of your treadmill, and insert it between the belt and the deck. It’s a good idea to have someone help you at this point. You can do it on your own, though.
After that, hold the towel on both sides and pull it from the beginning of the belt all the way to the end so that it gathers all of the dust and debris that has accumulated between the belt and the deck of your treadmill.
When you’ve done one side of the belt, take out the towel by pulling it from one side, and pull the belt so that you can clean the other side, and repeat the same steps. You might want to do that a few times till the towel comes out clean. That means you’ve caught everything that was stuck in that small space.
Second Method 
The second method is more on the automatic side as the treadmill is plugged in and turned on. You’ll start with the same steps, which include getting a towel that’s longer than the treadmill’s width and inserting it in the interspace between the belt and the deck, just as you’ve done for the first method.
The only difference here is that you’ll not pull the belt by yourself; alas, you’ll turn on the treadmill at the lowest speed possible and let it do the work of moving the belt. Consequently, the towel will catch on to everything over and over again.
An average that you can go with is about five turns of the belt to clear everything completely. You’ve got to pay attention to the towel and your hold on it. You must hold it as strong as possible so that it doesn’t escape from you and possibly get stuck in the mechanism of the treadmill.
That can cause major damage to the inner workings of the device. Having someone to help you so that you’re holding onto the towel from one side while they hold the other is a great idea.
End
Whichever method you choose to go with, after that, you might want to get a slightly damp washcloth and wipe the belt from its other side. Make sure that you don’t get it wet; you just want to catch on to all of the allergens accumulated on top of it.
Now, go over it again with a paper towel to remove any extra moisture that you might’ve left behind.
How Often Should the Belt Be Cleaned 
So, how often should you be doing this mini routine? To be honest, it entirely depends on your use of the treadmill and its placement in your house.
So, if it’s placed in the pathway of a window or a door or in any place where it can easily accumulate dust, then you’d want to do this routine on a weekly basis.
On the other side of the spectrum, if you don’t use your treadmill that much or have it in a closed area that doesn’t enjoy a direct pathway to the outside, then it’s something that can be done every two weeks or so.
Ultimately, our advice would be to do it as much as possible because that won’t just preserve the performance and extend the lifespan of your device; it’ll also contribute to your own health so that you’re not running in a vicinity full of dirt, dust, allergens, and pollen. All of these particles can easily disturb your respiratory system.
Extra Tips and Tricks
Now, we’ll briefly discuss some tricks that will make your treadmill experience so much better.
For starters, always place a mat under your device. This mat will help with the stability of the device and your own stability and performance. It’ll also protect your floors and prevent the dust from accumulating around the treadmill.
We’ve mentioned the point of treadmill placement and how important it’s. Try to put your treadmill in a place that isn’t highly susceptible to dust and dirt.
Additionally, it’s recommended to always have specific shoes for the treadmill so that you’re not carrying dirt from the outside to the inside.
Last but certainly not least, be very diligent with your research when you’re purchasing a home treadmill. It’s such a big-ticket purchase, and you certainly don’t want to end up with something you’re not 100% comfortable with.
Some of the great models present on the market today include the Nautilus t616 treadmill, the NordicTrack Commercial 1750, and the Cadance treadmill. You can even check out the ProForm 520 ZN treadmill reviews, and the ProForm 505 CST treadmill review for more information.
Final Thoughts
To wrap up, cleaning your treadmill’s belt is essential to its longevity and efficiency, which is applicable to any device present in your house. If you maintain it, it’ll live on, and if you don’t, then you’re throwing your money down the drain.
Cleaning the belt of your treadmill is an incredibly easy process, and the instructions are simple and to the point.